Mercedes-Benz EQE Airbag Repair in Dubai

At 800 Meta UAE, we specialize in providing premium repair and maintenance services for luxury vehicles like the Mercedes-Benz EQE. Recently, we were entrusted with a Mercedes-Benz EQE airbag repair in Dubai. As one of Mercedes-Benz’s most advanced electric sedans, the EQE features sophisticated safety systems, including airbags, that are critical to passenger protection in the event of a collision. Therefore, when an airbag system malfunctions or requires repair, it is imperative to address the issue immediately and with the highest level of precision.

Issues Identified and Solutions Provided:

Airbag issues are typically associated with warning lights on the dashboard, malfunctioning sensors, or the system failing to deploy properly in an emergency. Here’s a breakdown of the airbag issues we encountered during the Mercedes-Benz EQE airbag repair:

1. Airbag Warning Light
   • Issue: One of the most common signs of an airbag system malfunction is the airbag warning light illuminating on the dashboard. This indicates a potential issue with the airbag control unit, sensors, or wiring, signaling that the system may not deploy properly in the event of an accident.
   • Solution: After conducting a thorough diagnostic scan, we discovered a fault in the airbag control module (ACM). We reset the error codes and found that the module was not communicating with the rest of the vehicle’s systems. After replacing the faulty airbag control module with a genuine OEM replacement, we reprogrammed it and tested the system to ensure proper communication and functionality.
2. Faulty Airbag Sensors
   • Issue: The airbag sensors are responsible for detecting impact and triggering the airbag deployment. In the Mercedes-Benz EQE, we identified that one of the side-impact sensors had malfunctioned, which could potentially prevent the airbags from deploying during a side collision.
   • Solution: We replaced the faulty side-impact sensor with an OEM Mercedes-Benz part and recalibrated the sensor network. This ensures that the sensors are properly aligned and able to detect any impact to trigger a swift and effective deployment of the airbag system.
3. Damaged Airbag Wiring
   • Issue: In some cases, the wiring that connects the airbag system to the rest of the vehicle’s electrical network can become damaged. This can happen due to wear and tear, accidents, or electrical malfunctions, leading to a failure in the airbag deployment mechanism.
   • Solution: Upon inspecting the airbag wiring, we found that some of the wiring harnesses had been compromised, which affected the signal transfer between the sensors, control unit, and airbags. We carefully repaired or replaced the damaged wiring and ensured the electrical system was restored to factory specifications. After reassembling the components, we tested the system to ensure all connections were stable and functional.
4. Deployed Airbag Components
   • Issue: If an airbag has been deployed in a previous incident, it is necessary to replace not only the airbag module but also other components, including the steering wheel airbag, curtain airbags, seatbelt tensioners, and the airbag control unit. In this case, the steering wheel airbag had deployed during an accident and required full replacement.
   • Solution: We carefully removed the deployed airbags, including the driver-side airbag, curtain airbags, and seatbelt pre-tensioners. All replaced components were OEM Mercedes-Benz parts, ensuring compatibility and reliability. After the installation, we reset the system, performed thorough diagnostics, and carried out a full system check to confirm proper deployment functionality.
5. Airbag System Calibration
   • Issue: After repairing or replacing airbag components, it’s crucial to ensure that the entire airbag system is calibrated correctly. Any miscalibration could result in delayed or incorrect airbag deployment in an accident.
   • Solution: Once all components were replaced or repaired, we performed a full airbag system calibration. This process involved using advanced diagnostic tools to ensure that all airbag modules, sensors, and control units were in sync and would deploy in the correct sequence when needed. A series of tests were run to verify that the system was functioning optimally.

Mercedes-Benz EQE Airbag Module Replacement

Mercedes-Benz EQE Sensor Replacement

Mercedes-Benz EQE Seatbelt Pretensioner Repair

Mercedes-Benz EQE Airbag Light Reset

Mercedes-Benz EQE Airbag Wiring Harness Repair

Mercedes-Benz EQE Inflator Replacement

Mercedes-Benz EQE Steering Wheel Airbag Replacement

Mercedes-Benz EQE Passenger Airbag Repair

Mercedes-Benz EQE Crash Data Retrieval and Reset

Mercedes-Benz EQE Supplemental Restraint System (SRS) Inspection

Mercedes-Benz EQE Post-Collision Airbag Inspection